How to prevent oil leakage of the generator set when the generator set is in use? As a generator manufacturer, let Xiaobian take you to understand the skills to prevent oil leakage of the generator set!

 

Glue patching and leakage control method. If the oil pipe and water pipe of the oil tank and water tank cause small leakage due to cracks or sand holes, it can be applied with adhesive to clean the damaged area.

Padding and leakage control method. The oil pipe joint in the generator set has oil leakage at the leak-proof gasket. A thin plastic pad with double-sided lubrication can be added at both ends of the leak-proof gasket, and the leakage can be prevented by tightening it firmly.

The leakage shall be treated by pumping. In case of leakage of several paper pads such as the oil tank bottom, cylinder head, gear chamber cover, crankcase rear cover, etc. of the generator set, if the paper pad is clean without missing the joint surface, a layer of butter can be applied on both sides of the paper pad, and the bolts can be tightened to prevent leakage; If the paper pad is replaced, put the new paper pad in diesel oil for 10 minutes, take it out and wipe it clean, apply a layer of butter on the joint surface and then install it.

 

Lacquer liquid leak control method. If there is leakage at the joint of the crankcase of the diesel engine oil tank, the paint can be soaked in alcohol and then the paint can be painted on the clean joint.

 

Anaerobic glue leakage control method. When leakage occurs at the breather bolt stud on the diesel engine, anaerobic adhesive can be applied to the cleaned bolt thread or screw hole, which can quickly solidify to form a film and fill the part gap; This method has a better effect on the leakage treatment of the high pressure oil pipe joint thread of diesel engine.

 

Liquid sealant leakage control method. In case of interfacial leakage and destructive leakage caused by solid gasket defects on diesel engine, liquid sealant shall be applied to the clean solid gasket joint surface, and after curing, the peelable film gasket with uniform, stable and continuous adhesion can be formed to prevent leakage.

 

Scale rehabilitation glue leakage treatment. In case of leakage at the shaft and shaft sleeve bearing of the diesel engine, the bearing seat valve and the valve cone self-tightening oil seal filler, etc., the scale rehabilitation adhesive can be applied to the worn part of the cleaned collaboration part, and the solidified film layer with high wear resistance mechanical strength can be formed, and then the geometric shape and cooperation precision of the machined rehabilitation part can be processed to solve the leakage.

With the above summary of gas generator set, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.ptvydps.cn Or call for consultation, and we will do our best to solve it for you