燃氣發電機運行規程介紹
一、設備啟動前的準備工作:
1、 Preparation before device startup:
檢查燃氣發電機機油、冷卻水、燃氣等是否充足,并進行必要的加注。
Check if the oil, cooling water, gas, etc. of the gas generator are sufficient, and make necessary additions.
檢查燃氣發電機的各項指標,如電壓、電流、水溫、油壓等是否正常。
Check whether the various indicators of the gas generator, such as voltage, current, water temperature, oil pressure, etc., are normal.
發電機組的機械部件是否運轉正常,如傳動皮帶、軸承等。
Check if the mechanical components of the generator set are functioning properly, such as transmission belts, bearings, etc.
二、設備啟動:
2、 Device startup:
使燃氣發電機的啟動電源和燃氣供應已經打開。
Turn on the starting power and gas supply of the gas generator.
啟動發電機組,等待一段時間,使設備已經運轉穩定。
Start the generator set and wait for a period of time until the equipment is running stably.
三、設備運行中的注意事項:
3、 Precautions during equipment operation:
監測燃氣發電機組的各項指標,如電壓、電流、水溫、油壓等,及時排除故障。
Monitor various indicators of the gas generator set, such as voltage, current, water temperature, oil pressure, etc., and promptly troubleshoot.
定期檢查和維護發電機組,如更換機油、濾芯、火花塞等。
Regularly inspect and maintain the generator set, such as changing the oil, filter element, spark plug, etc.
在設備長期不用或停用的情況下,需要在啟用前進行相應的保養和維護,并進行檢查和試運行。
In cases where the equipment is not in use for a long time or is not in use, it is necessary to carry out corresponding maintenance and inspection, as well as trial operation, before use.
四、設備停機:
4、 Equipment shutdown:
關閉燃氣發電機的燃氣供應和電源,等待設備停止運行。
Turn off the gas supply and power supply of the gas generator, and wait for the equipment to stop running.
檢查發電機組的機械部件是否運行正常,并進行必要的維護。
Check if the mechanical components of the generator set are operating properly and perform necessary maintenance.
燃氣發電機組是一種利用燃氣燃燒產生高溫高壓氣體推動發動機轉動,通過發電機將機械能轉化為電能的設備。它由燃氣系統、發動機系統和發電機系統三部分組成。
Gas generator set is a device that uses high-temperature and high-pressure gas generated by gas combustion to drive the engine to rotate, and converts mechanical energy into electrical energy through the generator. It consists of three parts: gas system, engine system, and generator system.
燃氣發電機組燃氣系統包括氣體源、氣體調節、氣體過濾、氣體控制等設備,用于將燃氣輸送到發動機中進行燃燒。
The gas system of a gas generator set includes equipment such as gas source, gas regulation, gas filtration, and gas control, which are used to transport gas to the engine for combustion.
發動機系統由發動機和其它輔助設備組成,發動機是燃氣發電機組的核心部件,它將燃氣燃燒產生的高溫高壓氣體轉化為機械能,通過曲軸傳遞給發電機。
The engine system consists of an engine and other auxiliary equipment. The engine is the core component of a gas generator set, which converts the high-temperature and high-pressure gas generated by gas combustion into mechanical energy, which is transmitted to the generator through the crankshaft.
需要注意的是,在設備運行中,應嚴格遵守相關的安全操作規程,如切斷電源、關停發動機等。同時,應注意設備的保養和維護工作,及時排除故障,保證設備的正常運行。
It should be noted that during equipment operation, relevant safety operating procedures should be strictly followed, such as cutting off power, shutting down the engine, etc. At the same time, attention should be paid to the maintenance and upkeep of the equipment, and faults should be promptly eliminated to ensure the normal operation of the equipment.
仿木商品常見的行業:景觀園林;市政工程工程建筑;中國公民工程建筑。
Common industries for imitation wood products: landscape architecture; Municipal engineering construction; Chinese Civil Engineering Construction.
以上的文章由山東中拓新能源有限公司燃氣發電機組提供分享,更多內容請關注我們:http://www.ptvydps.cn
The above article is shared by Shandong Zhongtuo New Energy Co., Ltd.'s gas generator set. For more content, please follow us: http://www.ptvydps.cn
業務分類
Business classification產品推薦
product recommendation聯系方式
Contact Information截屏,微信識別二維碼